Fault Tolerence System (For MIS)

Fault Tolerence System

Fault-tolerance or graceful degradation is the property that enables a system to continue operating properly in the event of the failure of (or one or more faults within) some of its components. If its operating quality decreases at all, the decrease is proportional to the severity of the failure, as compared to a naïvely-designed system in which even a small failure can cause total breakdown. Fault-tolerance is particularly sought-after in high-availability or life-critical systems.
A fault-tolerant design enables a system to continue its intended operation, possibly at a reduced level, rather than failing completely, when some part of the system fails. The term is most commonly used to describe computer systems designed to continue more or less fully operational with, perhaps, a reduction in throughput or an increase in response time in the event of some partial failure. That is, the system as a whole is not stopped due to problems either in the hardware or the software. An example in another field is a motor vehicle designed so it will continue to be drivable if one of the tires is punctured. A structure is able to retain its integrity in the presence of damage due to causes such as fatigue, corrosion, manufacturing flaws, or impact.
Fault-tolerance is not just a property of individual machines; it may also characterise the rules by which they interact. For example, the Transmission Control Protocol (TCP) is designed to allow reliable two-way communication in a packet-switched network, even in the presence of communications links which are imperfect or overloaded. It does this by requiring the endpoints of the communication to expect packet loss, duplication, reordering and corruption, so that these conditions do not damage data integrity, and only reduce throughput by a proportional amount.

Reference
 



http://en.wikipedia.org/wiki/Fault_tolerance